Strut channels frame solar arrays, pipe supports and bracing systems, and every project orders them by length and hole pattern. A strut channel roll forming machine must hold profile accuracy on thin-gauge strip and switch sizes without long changeover.
Ground-mount and rooftop solar arrays frame on strut channels and PV mounting profiles. Project volumes are large and repetitive, which suits a line with recipe control and automatic cutting to length.
Seismic bracing for pipes, ducts and cable systems uses strut channel frames with punched connection holes. Hole positions follow the bracing design, so punching per drawing is required on every piece.
MEP contractors hang pipes, ducts and cable trays from strut support systems across commercial buildings. Consistent channel dimensions keep clamps and fittings interchangeable across the whole project.
Electrical panels, equipment racks and instrument stands are framed with strut channel. Clean cut ends and accurate lengths let installers assemble frames without reworking on site.
Suspended ceiling grids and overhead service supports use light-gauge channels in long runs. Thin strip forms steadily at line speed, with burr-free edges from hydraulic cutting.
Wuxi Tonghe Machinery manufactures cold roll forming equipment in Wuxi, China. Since 2011, the company has built CZ purlin machines, PV bracket lines, guardrail lines, cable tray lines and custom profile lines for customers in over 30 countries. The factory covers about 30,000 m² and employs 200+ staff, including a 50+ R&D team. Production is ISO9001 certified and products carry CE marking.
About Us Certifications Engineering Cases
C strut channels from one hundred to six hundred millimeters, with length set on the PLC between five hundred and six thousand millimeters. Other section sizes are tooled per drawing.
Carbon steel strip from zero point three to one point five millimeters. The frame and rollers are matched to your actual thickness during tooling design.
Strut channels and solar mounting profiles, built per customer drawing. Unistrut-type channels, slotted channels and special sections are all tooled to your specification.
Yes. PV mounting lines have been delivered to Algeria, Dubai and Hungary, including installation and operator training. References from these projects are available on request.
A complete line combines a decoiler, leveling unit, punching stations, the roll forming section and hydraulic cutting, with length set on the PLC. Automatic stacking is available for high-volume orders.
Send the channel section drawing with dimensions and thickness, the hole pattern, the material grade, your target output and plant voltage. If you produce to a market standard, send the standard drawing and we will match the tooling.
Yes. Our service team installs and commissions the line at your plant and trains your operators, with remote video support afterwards. Warranty: twelve months for the main machine, eighteen months for core components, plus spare parts support after startup.
Strut channel looks like a simple product, but the buyers behind it range from solar mounting factories to MEP contractors, and they specify the machine differently. This guide covers the points worth checking before you order.
A strut roll forming machine forms C-shaped strut channels with in-turned lips, plus the related profiles used in solar mounting structures. Strut channels work as a framing system: pipes, ducts, cable trays, solar panels and equipment all mount to the channel with standard fittings, so the profile accuracy and hole positions decide how well the whole system assembles.
Solar projects consume mounting profiles in large, repeated volumes, and every array design orders rails and posts by length and hole pattern. A solar strut roll forming machine with recipe control and automatic cutting matches this order pattern. Tonghe PV mounting lines are already running in Algeria, Dubai and Hungary, which gives new buyers reference projects across three regions.
One line covers C strut channels from one hundred to six hundred millimeters, formed from carbon steel strip at zero point three to one point five millimeters, with length set on the PLC between five hundred and six thousand millimeters. Galvanized strip is the common choice for outdoor solar and support applications. Confirm your real size list before ordering, because the roller tooling is built to your channel sections.
Strut channels connect through punched holes and slots, and Unistrut-type profiles carry regular hole patterns along the channel back. Punching units on the line follow your drawing, and the PLC stores each specification so repeat orders run identically. For solar mounting bracket machine buyers, this is the point that decides whether brackets assemble on site without drilling.
Five items let a manufacturer specify a strut channel line correctly: the channel section drawing with dimensions, the strip thickness and material grade, the hole pattern, your target output, and your plant voltage. With these confirmed, the roller tooling, punching units and line configuration are all specified against your product.
We're THRONCH, a direct factory in Wuxi, China, building custom roll forming lines for purlins, highway guardrail, cable tray, strut channel, and welded tube. Send us your profile drawing and get a line proposal within 24 hours.
Talk to our engineers
